Category: Uncategorized

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PedestalPod 45° models conveniently position displays 20″ off the deck, located near the bow and at a 45° angle for ease of viewing while fishing. This allows anglers to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even to control the trolling motor. Designed to resist impacts, vibration and moisture ingress, 45° PedestalPods are crafted with a thick gauge, UV-stable acrylic-capped ABS material and are built specifically with structural rigidity in mind. Built on the proven technology of NavPod’s popular range of PowerPods, 45° PedestalPods are also manufactured with a double gasket system that provides an excellent watertight seal to keep spray off electrical connections, ensuring the reliability and longevity of marine electronics.

Displays are easily installed in the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3″ in diameter with a 5″ round base and has a large 1.75″ opening, providing plenty of room for running and concealing wires internally for a very clean look. PedestalPod 45° models give protection for wires and connectors from water intrusion, UV exposure or damage from snagging and ripping connectors out of their sockets.

Pre-cut models are available for 7″ to 12″ displays from all major marine electronics manufacturers.

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods: Protection, Convenience, Security.

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods: Protection, Convenience, Security.

PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.

PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.

NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.

Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.

PowerPods: Protection, Convenience, Security.